home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
SGI Developer Toolbox 6.1
/
SGI Developer Toolbox 6.1 - Disc 4.iso
/
public
/
fax
/
src
/
etc
/
config.rc32acl
< prev
next >
Wrap
Text File
|
1994-08-01
|
2KB
|
49 lines
# $Header: /usr/people/sam/fax/etc/RCS/config.rc32acl,v 1.7 1994/04/26 17:38:09 sam Rel $
#
# Configuration for a Rockwell RC32ACL-based Class 2 modem.
# Boca M1440E firmware V1.000
# SupraFAX v.32bis firmware V1.000
# (and others)
#
# This configuration file sets up the modem to run at 38.4 for
# sending and for receiving. RTS/CTS is used for flow control
# which also works for data connections. Adaptive answer support
# is reliable, but to use it you must also enable ModemWaitForConnect
# to force the server to skip intermediate status messages and
# wait for the "CONNECT" message.
#
# CONFIG: CLASS2: ROCKWELL-RC32ACL
#
CountryCode: 1 # USA
LongDistancePrefix: 1
InternationalPrefix: 011
AreaCode: 415
DialStringRules: etc/dialrules
FAXNumber: +1.415.965.7824
ServerTracing: 1
SessionTracing: 11
RecvFileMode: 0600
LogFileMode: 0600 # private log files
DeviceMode: 0600 # device is accessible only to uucp/fax
SpeakerVolume: off
RingsBeforeAnswer: 1 # answer on first ring
#
ModemType: Class2 # use class 2 interface
ModemRate: 38400
ModemWaitForConnect: yes # wait for CONNECT on answer
#ModemResetCmds: &F2 # what you want for a Supra
# NB: enable this only if you're setup for dialins
#GettyArgs: "-h %l dx_%s" # locked at receive rate (for SGI)
#GettyArgs: "std.%s -" # locked at receive rate (for SunOS)
ModemFlowControl: rtscts
ModemFlowControlCmd: &K3 # hardware flow control
ModemSetupDTRCmd: &D2 # DTR off causes modem to reset
ModemSetupDCDCmd: &C1 # DCD follows carrier
ModemSetupAACmd: +FCLASS=0;+FAA=1# enable in class 0
#
ModemSendFillOrder: LSB2MSB # as expected
ModemRecvFillOrder: MSB2LSB # opposite of what makes sense
Class2RecvDataTrigger: "\022" # a la 2388-B
#
ModemDialCmd: +FCLASS=2DT%s # T for tone dialing